AD­VAN­TA­GES

• Large support wheels
• Con­ve­ni­ent tine section con­fi­gu­ra­ti­on, as the form remains constant while the

  ag­gres­siven­ess is set

• Wide ad­just­ment range for allsoil con­di­ti­ons
• In­di­vi­dual­ly suspended tine sections guided by par­al­le­lo­grams
• Spring-loaded, robust levelling rail with collision pro­tec­tion

TECHNICAL DATA

Extra-large support wheels

The large, trailing support wheels ensure very good rake height guidance. In addition, they allow easy cornering without the wheels and scrapers grinding against the ground.

Feeler wheel / Tail wheel

The feeler wheel / tail wheel’s speed sensor measures the com­bi­na­ti­on’s working speed to ensure uniform seed dis­tri­bu­ti­on. A further sensor de­ter­mi­nes the rake’s working or transport position. The seed shaft is thus au­to­ma­ti­cal­ly switched on and off and prevents double sowing in the headland.

50 mm tine spacing

The standard tine spacing of 50 mm is ideal for raking out weeds and mosses. The three-row ar­ran­ge­ment of the rake tines prevents the raked-out material from being pulled along and thus reduces the risk of clogging to a minimum.

Rake ad­just­ment

The ag­gres­siven­ess of the rake tines and thus their effect on the soil and turf are optimally adjusted by means of an easily ac­ces­si­ble lever. You can choose between four levels. This makes the tines perfectly adaptable to any work ap­p­li­ca­ti­on.

Ad­just­ment of the levelling rail

With the plig.in lever, the preload on the levelling rail can be easily adjusted to four levels. With a low preload, for example, young stands can be levelled gently; with a cor­re­spon­dingly high preload, the levelling effect can be si­gni­fi­cant­ly increased if required. It´s always excactly how you need it. The setting lever is located on the implement for quick handling.

Heavy-du­ty­le­vel­ling rail

The robust levelling rail at the rear leaves a cleanly levelled soil surface. The collision pro­tec­tion and the spring preloaded, ad­jus­ta­ble sus­pen­si­on prevent damage when ap­proa­ching or driving over obstacles.  The rail can be dis­mant­led quickly and easily for the best use of the  GREEN.RAKE expert in arable farming.

Rake tines

The tines’ double twist results in a larger field of motion. At the same time, the offset enables intensive raking.

Tine loss pro­tec­tion

If a tine is lost, the loss pro­tec­tion system ensures that the broken tine is pukked along and does not remain on the grassland where it could cause con­siderable damage during sub­se­quent work ope­ra­ti­ons. This pro­tec­tion system is standard equipment for all düvelsdorf rake models.

Flexboard

On stony soils, the flexboard ensures optimum and lowwear levelling. The plates are in­di­vi­dual­ly mounted on leaf springs to avoid stones and foreign bodies and thus ensure

smooth operation. The plates can be mounted in two positions to adjust the working intensity.