IMPRESSIVE ON ANY TERRAIN
The GREEN.RAKE expert can be adapted to your specific soil conditions. Optimum contour guidance is not only ensured by the individually suspended, 1.50 m wide tine section – the rake’s uniform form produced by the parallelogram guidance also provides optimum adjustment to the contour of the ground.
How aggressively you rake is up to you. The GREEN.RAKE expert can be adjusted from very gentle (e.g. for young grass on sandy, soft soils) to extremely aggressive for restoring hard soils.
WELL DESIGNED DOWN TO THE LAST DETAIL
Extra-large support wheels
The large, trailing support wheels ensure very good rake height guidance. In addition, they allow easy cornering without the wheels and scrapers grinding against the ground.
Feeler wheel / Tail wheel
50 mm tine spacing
The standard tine spacing of 50 mm is ideal for raking out weeds and mosses. The three-row arrangement of the rake tines prevents the raked-out material from being pulled along and thus reduces the risk of clogging to a minimum.
The aggressiveness of the rake tines and thus their effect on the soil and turf are optimally adjusted by means of an easily accessible lever. You can choose between four levels. This makes the tines perfectly adaptable to any work application.
Adjustment of the levelling rail
Heavy-duty levelling rail
The robust leveling rail at the rear leaves a cleanly leveled soil surface. The collision protection and the spring preloaded, adjustable suspension prevent damage when approaching or driving over obstacles. The rail can be dismantled quickly and easily for the best use of the GREEN.RAKE expert in arable farming.
The tines’ double twist results in a larger field of motion. At the same time, the offset enables intensive raking.
Tine loss protection
If a tine is lost, the loss protection system ensures that the broken tine is pukked along and does not remain on the grassland where it could cause considerable damage during subsequent work operations. This protection system is standard equipment for all düvelsdorf rake models.
On stony soils, the flexboard ensures optimum and low wear leveling. The plates are individually mounted on leaf springs to avoid stones and foreign bodies and thus ensure smooth operation. The plates can be mounted in two positions to adjust the working intensity.
- Grassland maintenance and reseeding in spring before complete renovation in late summer
- New planting of grassland areas
- Clearing damage caused by wildlife
- In agriculture: sowing of catch crops (ideally in combination with the TERRA.ROLLER expert)
- Large support wheels
- Convenient tine section configuration, as the form remains constant while the aggressiveness is set
- Wide adjustment range for allsoil conditions
- Individually suspended tine sections guided by parallelograms
- Spring-loaded, robust levelling rail with collision protection
Combining the GREEN.RAKE expert and the TERRA.ROLLER expert brings together the advantages of both machines and creates a multi-talented tool for grassland and arable land. The rake and roller can be used together or independently of each other.
This allows a higher rate of equipment use as well as a complete processing in one operation to be achieved. The roller can be used individually for arable farming and the rake works on its own on grassland. Coupling and uncoupling is quick and uncomplicated thanks to the attachment in the lower link hook. The grassland combination is operated simply by two double-acting control units.
- Low support load with large working width
- Roller and rake can also be used independently of each other
- Simple operation due to two DW control units
- Combined rake and roller can be suspended in a coupled state